IRT-730 Transmitter + Power Supply Unit + Mounting Bracket.
- Designed for rooms up to approximately 730m2 .
- The unit is equipped with a 1/4" threaded mounting hole and can be screwed to a photographic tripod stand for portable use, or it can be wall-mounted with the supplied mounting bracket.
- The transmitter is used with suitable receiver modules to be purchased separately.
Click here to see the IRT-730 transmitter stand-mounted.
Click here for further information about ADSworldwide Assisted Listening Systems.
ADSworldwide offers a number of options to accommodate both increased room size and different room configurations. Please contact our technical staff for the best solution applicable to your specific needs, but for example:
- a Repeater Panel (IRT-730-R) covering up to an additional 730m2 could be used in conjunction with either the IRT-270 transmitter or the IRT-730 transmitter.
Items may be purchased separately:
IRT-730(18-0021-U01), PSU-03(18-0096-227), BKT-01(18-0102-C08)
-------------------------------------------------------------------------
Please Note:
Infra-red receivers operating in the low band (95kHz and 250kHz) can suffer from florescent lighting interference. In cases where high frequency florescent and/or incandescent lighting are used (this includes modern energy-saving lamps) the infra-red signal may become unusable. In these cases use the high frequency infra-red systems operating above 2MHz.
|
