|
|
|
 |
|
|
The MPA-102 is a single channel, low-noise microphone pre-amplifier, for mains or battery use
(4 x 9V batteries, not supplied).
- 1 XLR, balanced microphone input
- Gain, 12 steps 15-70dB
- Green/red LED for operation/peak
- Phantom power +24V, can be switched on additionally
- Microphone phase can be switched
- Lo cut 100Hz, hi cut 12kHz, 12dB/oct., switchable
- 1 preamplifier output
- 1 stereo line input
- 1 stereo line output
- Level control and panorama control for mixing the microphone signal to the stereo line channel
|
|
|
| Power Supply |
15V via supplied plug-in PSU 10VA
4x9V batteries not supplied |
| THD at rated power |
<0.01% |
| Frequency response |
20Hz - 20kHz |
| Input Sensitivity |
0.3-150mV, switchable |
| Input Impedance |
Microphone 2.2k ohm
Stereo Line 10k ohm |
| Outputs |
Line, balanced 1V/100ohm, 12V maximum
Stereo line 1V/100ohm, 6V maximum
Stereo Master |
| Filters |
Low Cut 100Hz/-3dB, 12dB/oct.
High Cut 12kHz/-3dB, 12dB/oct. |
| Gain |
Microphone 15-70dB
Stereo Line 0dB |
| Signal/Noise ratio |
Microphone >66bD (unweighted)
Stereo Line 80dB (unweighted) |
| Dimensions |
H55 x W116 x D125 mm |
|
|
|
|
|
 |
MPA 102 Microphone Pre-amplifier |
 |
|
Product Code : 13-0802-065
Weight(kg) : 0.000 |
 |
£ P.O.A. |
|
|
|
|
All prices include carriage to UK Mainland addresses but exclude VAT and are recommended selling prices. E-mail us for specially quoted prices for quantity purchases |
|
|
|
