The U-scan headband microphone system is competitively priced and built with proven engineering. The system is also available with a lapel (U100B) or handheld (U100M) transmitter.
The receiver includes the following features
auto-scan function to locate an interference-free channel quickly and easily
16 selectable, pre-programmed frequencies to make it easy to set up multiple system configurations and to avoid interference frequencies
diversity technology to ensure quality reception
integrated charging function for cost savings and environmental protection
LED display for the scanned interference-free frequency
5 segments LED for RF and AF
squelch adjustment
balanced XLR connector and unbalanced 1/4 inch jack output
durable chassis of 1/2 rack design
Technical Specification
Receiver
Frequency Range
863-865 MHz
Frequency Stability
+ / - 0.0005%
Modulation Mode
FM
Oscillator
PLL synthesized
Receiving Mode
Diversity, single channel
Receiving Sensitivity
>80dB S/N ratio at 8dB
Image and Spurious Rejection
80dB minimum
Selectivity
>50dB
IF Frequency
1st - 56 MHz. 2nd - 10.7 MHz
Dynamic Range
>96dB
Tone Signal
32.768 kHz
Signal to Noise Ratio
>94dB at 48 kHz deviation and 60dBuV antenna input
AF Response
80 Hz - 12 kHz + / - 3dB
T.H.D.
<1% at 1 kHz
Audio Output Line Level
1V (0dB)
Audio Output 600ohm Mic Level
100mV, 2Kohms
Power Supply
12V dc
Dimensions
H44, W211, D180 mm
U-Scan U100H UHF Headband System
Product Code : 10-0731-360 Weight(kg) :
£ P.O.A.
All prices include carriage to UK Mainland addresses but exclude VAT and are recommended selling prices. E-mail us for specially quoted prices for quantity purchases