Find A Local Installer

Find an installer in your area.

Join Our Network

APPLY TODAY Join our local Installer network for FREE!!!

ADSworldwide PA Project Solutions

Audio Design Services have a wealth of expertise in providing, designing, commissioning and installing commercial public address systems (PA systems)

Our Public Address system for our boutique is fantastic, the speakers are very discreet yet it's really clear and powerful if need be. It was the perfect solution for a fashion boutique environment.

Maria Cheetham
www.eternalenvy.com

Infra Red Listening & Hearing Systems

An infrared listening system is one of the simplest, most secure methods of satisfying the requirements of the hearing impaired and the legeslation intended to protect them. IR listening systems provide audio amplication to loops, hearing aids or via a headset maintaining security without overspill.

IRT-M110 INFRA RED TRANSMITTER 2.3/2.8MHz - (FOR MEDIUM ROOMS) 18-0011-000

Download Product Datasheet

Download Product PDF

Technical Specification
Model:	IRT-M110 Transmitter - 2.3/2.8MHz
Order Code:	18-0011-000
Type:	1W IR Transmitter
Power Consumption:	4W
Modulation Frequency:	ow Band 95kHz, 250kHz FM / High Band 2.3MHz, 2.8MHz FM
Signal to Noise Ratio:	>60dB
High Level Input (Transmitter):	20Hz - 20kHz 1V - 25V 10k ohm balanced 2-pole terminal block connector
Line Input:	20Hz - 20kHz 100mV - 2V 10k ohm balanced RCA and 3-pole terminal block connectors
Microphone Input:	50Hz - 12KHz 0.1mV - 100mV 600ohm balanced 12 Vdc phantom source XLR connector
Infra-Red Power, Coverage Area:	1W, 270m2
Baseband Signal Connector:	BNC input and output
Colour:	Black
Dimensions:	H37 x W230 x 90mm
Weight:	2kg

Our infra-red systems, of varying output power, are designed for use in the home, at reception and counter areas, for committee and conference venues, in care homes, churches and other places of worship, schools, colleges and other educational establishments, halls, leisure centres and in larger complexes.

The IRT-M110 Transmitter is a medium-size room, infra-red, low band or high band (95/250 kHz or 2.3 /2.8 MHz, switchable) transmitter, complete with power supply unit and wall-mount bracket. It is designed for medium rooms up to approximately 110m2 on High frequency settings and 270m2 can be achieved on low frequency setting. The unit is equipped with a 1/4" threaded mounting hole and can be screwed to a photographic tripod stand for portable use, or it can be wall-mounted with the supplied mounting bracket. The transmitter is for use with suitable receiver modules to be purchased separately.

ADSworldwide offers a number of options to accommodate both increased room size and different room configurations. Please contact our technical staff for the best solution applicable to your specific needs, but for example: the IRT-M400 is a transmitter designed for larger rooms up to 730m2; several IRT-M110 transmitters can be daisy-chained for room configurations larger than 270m2; a Repeater Panel (IRT-400R) covering up to 730m2 can be used in conjunction with either the IRT-M110 transmitter or the IRT-M400 transmitter.

Please Note: Infra-red receivers operating in the low band (95kHz and 250kHz) can suffer from fluorescent lighting interference. In cases where high frequency fluorescent and/or incandescent lighting are used (this includes modern energy-saving lamps) the infra-red signal may become unusable. In these cases use the high frequency infra-red systems operating above 2MHz.

• Medium-size room, infra-red, low band or high band (95/250 kHz or 2.3 /2.8 MHz, switchable) transmitter, complete with power supply unit and wall-mount bracket.
• Designed for rooms up to approximately 270m2.
• Equipped with a 1/4" threaded mounting hole for fixing to a photographic tripod stand for portable use.
• Can be wall-mounted with the supplied mounting bracket.
• For use with suitable receiver modules to be purchased separately.
• ADSworldwide offers a number of options to accommodate both increased room size and different room configurations. Contact our technical staff for the best solution applicable to your specific needs.
• Please Note: Infra-red receivers operating in the low band (95kHz and 250kHz) can suffer from fluorescent lighting interference. In cases where high frequency fluorescent and/or incandescent lighting are used (this includes modern energy-saving lamps) the infra-red signal may become unusable. In these cases use the high frequency infra-red systems operating above 2MHz.